Flashing Tape (Aluminium, Butyl)

A strong self-adhesive butyl sealing strip, which provides an instant bond to give a permanent watertight seal.

The butyl tape having good moisture vapour transmission rates is laminated with aluminium foil, is completely free of solvents and offers excellent adhesion to all kinds of surfaces. Flexible to apply and is positioned into place by hand.

Application

• The butyl flashing tape bonds to most surfaces including concrete, wood, brick and other materials used in the building industry.
• It can be used to repair lead flashing, in conservatory construction, sealing roof ridges, flashing of skylights, sealing leaks in drain pipes and guttering, protecting pipe and tank insulations, repairing green houses and generally can be applied in a large number of construction and maintenance situations.
• Cut a section of the flashing tape to length, removing the release liner before placing the tape into position. Use a seam roller to ensure all edges and overlaps are firmly sealed. When overlapping allow a minimum of 120mm. Do not use in temperatures below 5°C

Surface preparation.

• All surfaces must be dry, clean and free from grease, dust, oil, loose materials and water. If used on concrete or other porous surfaces then a suitable primer should be used.

• We can offer the rolls supplied into your company with your own companies branding on the rolls via a self adhesive label, which we will print and apply in our production process.